As with the VLFB2, both adjustments are easy to reach and fairly simple to use. We liked several other mounts that we tested, but one or two small drawbacks caused them to fall behind our picks. A former upgrade pick before we added full-motion mounts , the Sanus VLT6 tilt mount also allows the TV to shift slightly to each side.
This flexibility gives you a lot of room for wiring and lets you angle the screen to the side a little. The VLT6 is the only tilt mount we tested that can attach to metal studs. But even with those drawbacks, we were amazed with the overall look of the Peerless.
Every detail appeared to be well thought out, and the sleek, artistic look impressed us. It is compatible with TVs from 42 to 90 inches and has a depth of 2. We plan to check out this new model soon. Given that the two mounts are in the same ballpark price-wise, we prefer the model that has been approved through third-party testing.
On the plus side, the release clips of the Rocketfish were among the easiest to use. Although you can adjust the Cheetah to fit almost any size TV, for TVs in the size range we were looking at, the wall plate requires disassembly so you can add an extension to it.
Also, the overall polish of the mount was lacking; some of the screws had a little surface rust out of the box.
It was the least expensive UL-approved model we saw, but it holds the TV a little farther off the wall than the Monoprice EZ Series , and it does not offer post-install adjustment.
The customer feedback on Amazon for the majority of these models is usually pretty high, but we frequently found comments about cheap parts and limited customer service. In fact, a couple of these inexpensive models disappeared in the time it took for us to write the initial version of this guide, highlighting the come-and-go nature of these inexpensive mounts.
Among full-motion mounts, we also tested the Mounting Dream MD We researched, but did not test, a number of other Peerless mounts. The SAPU has a profile of over 3 inches. And the SUAPU has a larger bracket but is still nowhere near the width of the full-motion Sanus model we recommend. In the lower full-motion price range, the Monoprice , , and all have profiles of over 3 inches. Remember, pounds is the advertised weight limit. UL approval indicates that it can hold at least four times that amount.
We asked Sanus about this, and company representatives said that if compatible bolts are not included in its hardware pack, it can ship them out, often as soon as the next day.
They also said a longer bolt could be used with additional spacers. This may not always be possible, and there is a chance the longer bolt could get in the way of the tilt. We found customer comments on Amazon saying that the hardware included with the VMPL50A-B1 was not compatible with many Samsung TVs and that buyers needed to contact Sanus in order to get the properly sized bolts.
This is actually outdated info, from a time before Sanus started including a large hardware pack with the mount. Doug Mahoney is a senior staff writer at Wirecutter covering home improvement. He spent 10 years in high-end construction as a carpenter, foreman, and supervisor. He lives in a very demanding year-old farmhouse and spent four years gutting and rebuilding his previous home.
He also raises sheep and has a dairy cow that he milks every morning. Looking for a new TV but unsure where to start?
Whether you want to shop by size, price, or purpose, we have recommendations. How we picked Holds a inch TV. Our pick. Upgrade pick. Budget pick.
Also great. Yes, you can mount a TV without studs using hollow wall anchors, which are used to hang objects on a wall, according to Digital Trends. However, these have limits. Make sure they can handle the weight of your TV.
Yes, a TV mounting service is often able to install a home theater system as well. Companies and technicians who offer flat-screen TV wall mount installation service may offer package deals on installing surround sound and other parts of a home theater installation. To find the best TV mounting service near you that can install a surround sound system in your home, compare companies side by side. TV wall mounts are generally universal. Thanks to this set of standards, any mount you buy is likely to be a universal TV wall mount.
However, exceptions do apply. Many TVs can be mounted with standard equipment. However, you need to cover a few details before mounting a TV. Know the size and weight of your TV before you purchase a mount. Match this number to the VESA-compatible mount to ensure compatibility. You never pay to use Thumbtack: Get cost estimates, contact pros, and even book the job—all for no cost.
Join as a pro. See all. Events and more. Other Info. Find a flat screen TV installer near you 18 near you. Zip code. Yes No. Client has mount or stand?
TV installation location Wall mount above fireplace Wall mount Recessed wall mount Not sure, need professional's help to decide Other. Great 4. Great value. Offers remote services. Online now. Arash M. Slowly slide the stud finder horizontally across your wall until it beeps or a light blinks. Mark the location of the stud with a pencil before moving the finder over by about 16—18 inches 41—46 cm so you can locate another stud.
Run the stud finder vertically between the studs of your wall to check if there are any horizontal studs, also known as fire blocks. Hold the mount against the wall to mark the holes. Use your nondominant hand to support the mount and find the holes along the top and bottom that line up with the studs.
Make dots on your wall that line up with each of the holes so you know where to attach them. Then choose 2 evenly spaced holes on the bottom of the mount. Pre-drill holes in your wall where you marked them. Hold the drill so the bit is perpendicular to the wall and slowly bore holes through each of your marks. Toggle bolts are hollow fasteners that have hinged ends to hold them securely against the back of the wall.
Put toggle bolts in the rest of the holes. Screw the mount into your wall. Hold the mount against your wall so the holes along the top and bottom line up with the holes you just drilled. Feed the screws provided with the mount kit through the holes on the mount and tighten them by hand.
Finish tightening the screws with a screwdriver to secure the mount. Part 2. Get an in-wall power extender. An in-home power extender has 2 receptacles that connect behind your wall and provide power to an additional outlet. When you plug the lower receptacle into a wall outlet, it will provide power to the upper receptacle that you can hide behind the TV. Trace the outlines of the power extender receptacles on your wall. Hold the upper receptacle against your wall in a spot that your TV will cover once you hang it.
Use a pencil to draw an outline around the receptacle. The lower receptacle will be visible on your wall, but you can easily hide it behind a shelf or entertainment center. Cut along your outlines using a drywall saw or utility knife. Push the blade of the saw or knife into your wall so it breaks through the other side.
Use a slow and straight sawing motion to slice through the drywall along the outline you drew. Pop the piece of drywall away from the wall after cutting it out. Repeat the process with the other outline that you marked.
Fish any AV cords and the power connector between the holes in your wall. Feed a fish tape, which is a tool with a long line used to run wires through walls, into the upper hole and push it straight down. Pull the fish tape out from the hole for the lower receptacle when you see it.
Pull the fish tape up through the upper hole to pull the wires through. Instead, you will need to validate that you have located studs before you try to mount your TV.
Once you have located where the studs are, make a pencil mark on the wall over each single stud. Once you have determined your stud locations, the next step is to measure out the desired height for mounting your TV.
Be sure to consider your ideal viewing height before you take out the drill. The easiest time to adjust the height of your TV mount is before you start making holes, so be sure you are completely happy with your height and location. Once you have settled on the desired height, use a tape measure and a pencil to mark on the wall where you will want the mounting bracket to be drilled and connected to studs 5. Time to start drilling!
During this step, it is vital to make sure that you are drilling into the studs and that you are using a wall level to make sure that the mounting bracket is even as you attach it. Some TV mounting brackets even have levels built in to help with this. Using wall bolts, attach the mounting bracket to the wall and verify that it is level once attached 6.
Once your mounting bracket is securely attached to the studs on the wall, you are ready to Mount the TV. To do this, we recommend detaching the mounting brackets from the mount since you will need to securely attach your TV using bolts. To do this lay your TV flat and screw on the bracket.
Once the bracket is attached to the TV, you then attached both the bracket and the TV back to the mount on the wall. With your TV securely mounted in the corner, all that is left to do is to adjust the angle and mounting arm as needed so it is positioned perfectly for comfortable viewing. From there, you are ready to enjoy your new corner-mounted TV!
0コメント